SMPTE 2037-2009
Mapping VC-1 into the MXF Generic Container
standard by Society of Motion Picture and Television Engineers, 01/01/2009
SMPTE ST 425-1:2017
Source Image Format and Ancillary Data Mapping for the 3 Gb/s Serial Interface
standard by Society of Motion Picture and Television Engineers, 10/23/2017
SMPTE RP 34-1998
Dimensions for 16-mm Motion-Picture Projector Reel Spindles (R2003) (Archived 2010)
standard by Society of Motion Picture and Television Engineers, 01/01/1998
SMPTE 216-1998 (Archived 2003)
Motion-Picture Film (35-mm) – Four-Track Striped Release Prints – Recorded Characteristic of Magnetic Audio Records
standard by Society of Motion Picture and Television Engineers, 01/01/1998
SMPTE 2051-2010 AMendment 1:2013
Amendment 1 to Two-Frame Marker for 50-Hz and 60(/1.001)-Hz Progressive Digital Video Signals on 1.5 Gb/s and 3 Gb/s Interfaces
Amendment by Society of Motion Picture and Television Engineers, 08/29/2013
SMPTE ST 2070-2:2014
Stereoscopic 3D in MXF for Operations – OP1a Mapping
standard by Society of Motion Picture and Television Engineers, 05/10/2014
SMPTE 2021-2008
Broadcast Exchange Format (BXF)
standard by Society of Motion Picture and Television Engineers,
SMPTE ST 185:2011
Motion-Picture Film (70-mm) – Six Magnetic Records on Release Prints – Position, Dimensions, Reproducing Speed and Identity
standard by Society of Motion Picture and Television Engineers, 12/05/2011
SMPTE 181-2001
Motion-Picture Film (8-mm Type S) – 16-mm Film Perforated 8-mm Type S (1-3) – Printed Areas
standard by Society of Motion Picture and Television Engineers, 01/01/2001
SMPTE 270-2008
Motion-Picture Film (65-mm) – Manufacturer-Printed Latent Image Identification Information – 80 Perforation Repeat (Revision of SMPTE 270-2005)
standard by Society of Motion Picture and Television Engineers, 10/10/2008
SMPTE RP 45-1972
Use and Care of Sound Test Films (R1987)
standard by Society of Motion Picture and Television Engineers, 01/01/1972
SMPTE EG 34-2004
Pathological Conditions in Serial Digital Video Systems
standard by Society of Motion Picture and Television Engineers, 01/01/2004