SAE AS3246E
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
standard by SAE International, 08/24/2020
SAE AMS7725F
Tungsten Heavy Alloy Shapes, Sintered, High Density
standard by SAE International, 11/12/2020
SAE AS22520/44A
CRIMPING TOOL, TYPE II, WIRE HEATLESS TERMINATION, HAND ACTUATED, WIRE SIZES 26-12
standard by SAE International, 11/02/2020
SAE AS59158A
Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes
standard by SAE International, 08/03/2020
SAE AS9112C
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A
standard by SAE International, 11/12/2020
SAE AS8049D
Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft
standard by SAE International, 11/02/2020
SAE AMS4330D
Aluminum Alloy, Plate (2297-T87) 2.8Cu – 1.5Li – 0.30Mn – 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged
standard by SAE International, 11/30/2020
SAE AMS2514B
Anodic Coating on Aluminum Alloys Sulfuric Acid Process, Resin-Sealed
standard by SAE International, 10/19/2020
SAE J2912_202009
Performance Requirements for R-134a and R-1234yf Refrigerant Diagnostic Identifiers (RDI) for Use with Mobile Air Conditioning Systems
standard by SAE International, 09/23/2020
SAE J1380_202011
The Measurement of Highway Truck and Bus Tire Rolling Resistance (Stabilized: Nov 2020)
standard by SAE International, 11/09/2020
SAE J1273_202009
Recommended Practices for Hydraulic Hose Assemblies
standard by SAE International, 09/01/2020
SAE AS85049/41E
CONNECTOR ACCESSORIES, ELECTRICAL, NON-ENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR AS50151 SOLDER TYPE, V THREAD OF MS310X, CLASSES A, B, C, OR K CONNECTORS AND AS85049 ACCESSORIES)
standard by SAE International, 09/01/2020