SAE AS6870
Nondestructive Inspection Program Requirements for Aerospace Systems
standard by SAE International, 12/10/2020
SAE AS6488
FITTING, TEE, BULKHEAD, MALE FLARELESS TO EXTERNAL SWAGE ON RUN, EXTERNAL SWAGE ON BRANCH, HYDRAULIC
standard by SAE International, 03/08/2021
SAE AMS6421H
Steel, Bars, Forgings, and Tubing 0.80Cr – 0.85Ni – 0.20Mo – 0.003B (0.35 – 0.40C) (Modified 98B37)
standard by SAE International, 03/01/2021
SAE AMS4731D
Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant 67Ni – 31Cu Annealed
standard by SAE International, 04/06/2021
SAE AMS3307E
Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 – 75 Shore A Hardness
standard by SAE International, 03/16/2021
SAE AS3160B
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .4375-20 UNJF-3A
standard by SAE International, 12/30/2020
SAE AMSSTD595A_A1
Amendment 1 – Colors Used in Government Procurement
Amendment by SAE International, 03/11/2021
SAE AS3161B
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .5000-20 UNJF-3A
standard by SAE International, 01/13/2021
SAE ARP1846B
Measurement of Far Field Noise from Gas Turbine Engines During Static Operation (Stabilized: Dec 2020)
standard by SAE International, 12/21/2020
SAE AMS4457A
Aluminum Alloy, Sheet 3.5Cu – 1.1Li – 0.50Mg – 0.40Ag – 0.12Zr (2098-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
standard by SAE International, 01/26/2021