NAS 819

Cap – Protective, Flanged Fitting
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 12/31/1979

NAS 818

Plug – Protective, Flared Tube, Hose Assemby or MS33649 Boss
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 03/17/1978

NAS 99

Rod Assembly-Control, Welded Tube, 3/8 O. D., Steel, 1/4 Adjustable Clevis and Bearing Ends.
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 10/15/1946

NAS 6974 THRU 6982

Pin, Swage Locking, A-286 Cres, 100 Shear Head, Stump-Type
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 07/08/1988

NAS 7014-7022 Rev. 4

Pin, Swage Locking, A286 Cres, Protruding Head, Shear/Tension, Pull-Type
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 02/29/2016

NAS 662

Screw, Machine, Flathead 100 Plain and Self-Locking
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 11/30/1994

NAS 9800 Rev. 3

Head Protrusion Gaging, 100 Degrees Flush Head Fasteners, Gaga Block, Gage Diameters and Stylus
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 09/19/2014

NAS 940 Rev. 2

Press – Hydraulic Direct Acting Internal Expansion
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 06/29/2012

NAS 9312

Rivet-Blind, Flanged Dome Head, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code M
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 02/28/2000

NAS 897 Rev. 3

Reamers, Chucking, Right-Hand Cut, 0.0938 Through 1.5000 Inch
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 12/30/2016

NAS 977

Milling Machine, Contour, Numerical Control, Multiaxis, Traveling Gantry/Table, Combination High and Low Speed
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 09/01/1965

NAS 952

Filament Winding Machine, Horizontal, Numerically Controlled
Data Sheet by Aerospace Industries Association – National Aerospace Standard, 04/15/1976