NACE TM0294-2016

Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete
standard by National Association of Corrosion Engineers, 08/01/2016

NACE MR0174-2007

Standard Material Requirements – Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants
standard by National Association of Corrosion Engineers, 03/11/2008

NACE 01104

Electrochemical Realkalization of Steel-Reinforced Concrete – A State-of-the-Art Report
Report / Survey by National Association of Corrosion Engineers, 04/01/2004

NACE SP21424-2018

Alternating Current Corrosion on Cathodically Protected Pipelines: Risk Assessment, Mitigation, and Monitoring
standard by National Association of Corrosion Engineers, 2018

NACE SP0300-2016/ISO 16784-1:2006

Corrosion of metals and alloys – Corrosion and fouling in industrial cooling water systems – Part 1: Guidelines for conducting pilot scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
standard by National Association of Corrosion Engineers, 08/01/2016

NACE SP0298-2007

Standard Practice – Sheet Rubber Linings for Abrasion and Corrosion Service
standard by National Association of Corrosion Engineers, 08/30/2008

NACE SP0775-2013

Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations
standard by National Association of Corrosion Engineers, 09/09/2012

NACE 10A392-2019

Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures
Report / Survey by National Association of Corrosion Engineers, 09/20/2018

NACE 11100

Use of Reference Electrodes for Atmospherically Exposed Reinforced Concrete Structures
Report / Survey by National Association of Corrosion Engineers, 03/01/2000

NACE 10B189

Direct Current Operated Rail Transit Stray Current Mitigation
Report / Survey by National Association of Corrosion Engineers, 08/01/2014

NACE SP0572-2007

Standard Recommended Practice – Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Beds
standard by National Association of Corrosion Engineers, 07/01/2007