IEC 60601-2-20 Ed. 3.0 b:2020
Medical electrical equipment – Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
standard by International Electrotechnical Commission, 09/01/2020
IEC 60335-1 Ed. 6.0 en Cor. 1:2020
Corrigendum 1 to Household and similar electrical appliances – Safety – Part 1:General requirements
Amendment by International Electrotechnical Commission, 12/01/2021
IEC 61215-1-2 Amd. 1 Ed. 2.0 b:2022
Amendment 1 to Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
Amendment by International Electrotechnical Commission, 03/01/2022
IEC 61970-452 Ed. 4.0 b:2021
Energy management system application program interface (EMS-API) – Part 452: CIM static transmission network model profiles
standard by International Electrotechnical Commission, 10/01/2021
IEC 62906-5-7 Ed. 1.0 b:2022
Laser displays – Part 5-7: Measuring methods of image quality affected by speckle for scanning laser displays
standard by International Electrotechnical Commission, 01/01/2022
IEC /IEEE 80005-2 Ed. 1.0 b:2016
Utility connections in port – Part 2: High and low voltage shore connection systems – Data communication for monitoring and control
standard by International Electrotechnical Commission, 06/01/2016
IEC 62271-200 Ed. 3.0 b:2021
High-voltage switchgear and controlgear – Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
standard by International Electrotechnical Commission, 05/01/2021
IEC 63103 Ed. 1.0 b:2020
Lighting equipment – Non-active mode power measurement
standard by International Electrotechnical Commission, 07/01/2020
IEC 60152 Ed. 2.0 b:2021
Designation of phase differences by hour numbers in three-phase AC systems
standard by International Electrotechnical Commission, 07/01/2021
IEC 63044-4 Ed. 1.0 b:2021
Home and building electronic systems (HBES) and building automation and control systems (BACS) – Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
standard by International Electrotechnical Commission, 06/01/2021
IEC 60444-6 Ed. 3.0 b:2021
Measurement of quartz crystal unit parameters – Part 6: Measurement of drive level dependence (DLD)
standard by International Electrotechnical Commission, 09/01/2021
IEC 61300-3-33 Ed. 3.0 b:2022
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-33: Examinations and measurements – Withdrawal force from a resilient alignment sleeve using gauge pins
standard by International Electrotechnical Commission, 01/01/2022