IEC 60331-1 Ed. 2.0 en:2018

Tests for electric cables under fire conditions – Circuit integrity – Part 1: Test method for fire with shock at a temperature of at least 830¿¿C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
standard by International Electrotechnical Commission, 03/28/2018

IEC 60309-1 Ed. 4.1 b:2005

Plugs, socket-outlets and couplers for industrial purposes – Part 1: General requirements CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 12/08/2005

IEC 60268-16 Ed. 4.0 b:2011

Sound system equipment – Part 16: Objective rating of speech intelligibility by speech transmission index
standard by International Electrotechnical Commission, 06/28/2011

IEC 60076-3 Ed. 3.0 b:2013

Power transformers – Part 3: Insulation levels, dielectric tests and external clearances in air
standard by International Electrotechnical Commission, 07/31/2013

IEC 60068-2-69 Ed. 2.0 b:2007

Environmental testing – Part 2-69: Tests – Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
standard by International Electrotechnical Commission, 05/09/2007

IEC 60317-26 Amd.1 Ed. 2.0 b:1997

Amendment 1 – Specifications for particular types of winding wires. Part 26: Polyamide-imide enamelled round copper wire, class 200
Amendment by International Electrotechnical Commission, 12/22/1997

IEC 60252-1 Ed. 2.1 b:2013

AC motor capacitors – Part 1: General – Performance, testing andrating – Safety requirements – Guidance for installation and operation CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 08/29/2013

IEC 60168 Ed. 4.2 b:2001

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 04/19/2001

IEC 60154-2 Ed. 2.0 b CORR1:1981

Corrigendum 1 – Flanges for waveguides. Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
Corrigenda by International Electrotechnical Commission, 11/01/1981

IEC 60068-2-52 Ed. 3.0 b:2017

Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic (sodium chloride solution)
standard by International Electrotechnical Commission, 11/07/2017

IEC 60297-3-102 Ed. 1.0 b:2004

Mechanical structures for electronic equipment – Dimensions of mechanical structures of the 482,6 mm (19 in) series – Part 3-102: Injector/extractor handle
standard by International Electrotechnical Commission, 08/17/2004