IEC 60130-3 Ed. 1.0 b:1965

Connectors for frequencies below 3 MHz – Part 3: Battery connectors
standard by International Electrotechnical Commission, 01/01/1965

IEC 60115-4-3 Ed. 1.0 b:1993

Fixed resistors for use in electronic equipment – Part 4: Blank detail specification: Fixed power resistors, heat-sink types. Assessment level H
standard by International Electrotechnical Commission, 03/31/1993

IEC 60143-2 Ed. 1.0 b:1994

Series capacitors for power systems – Part 2: Protective equipment for series capacitor banks
standard by International Electrotechnical Commission, 08/05/1994

IEC 60335-2-107 Ed. 2.0 b:2017

Household and similar electrical appliances – Safety – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
standard by International Electrotechnical Commission, 12/15/2017

IEC 60079-6 Ed. 3.0 b:2007

Explosive atmospheres – Part 6: Equipment protection by oil immersion "o"
standard by International Electrotechnical Commission, 03/13/2007

IEC 60055-2 Amd.1 Ed. 1.0 b:1989

Amendment 1 – Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements
Amendment by International Electrotechnical Commission, 09/15/1989

IEC 60317-42 Amd.1 Ed. 1.0 b:2010

Amendment 1 – Specifications for particular types of winding wires – Part 42: Polyester-amide-imide enamelled round copper wire, class 200
Amendment by International Electrotechnical Commission, 02/18/2010

IEC 60169-3 Ed. 1.0 b:1965

Radio-frequency connectors – Part 3: Two-pin connector for twin balanced aerial feeders
standard by International Electrotechnical Commission, 01/01/1965

IEC 60317-70 Ed. 1.0 b:2017

Specifications for particular types of winding wires – Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
standard by International Electrotechnical Commission, 05/04/2017

IEC 60317-27 Amd.1 Ed. 3.0 b:1999

Amendment 1 – Specifications for particular types of winding wires – Part 27: Paper tape covered rectangular copper wire
Amendment by International Electrotechnical Commission, 10/29/1999

IEC 60335-2-14 Ed. 6.0 b:2016

Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines
standard by International Electrotechnical Commission, 06/24/2016