IEC 60231E Ed. 1.0 b:1977

Supplement E – General principles of nuclear reactor instrumentation – Principles of instrumentation of high temperature indirect cycle gas-cooled power reactors (HTGR)
standard by International Electrotechnical Commission, 01/01/1977

IEC 60092-354 Ed. 3.0 b:2014

Electrical installations in ships – Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV)
standard by International Electrotechnical Commission, 08/25/2014

IEC 60245-7 Amd.1 Ed. 1.0 b:1997

Amendment 1 – Rubber insulated cables – Rated voltages up to and including 450/750 V – Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
Amendment by International Electrotechnical Commission, 05/30/1997

IEC 60151-23 Ed. 1.0 b:1970

Measurements of the electrical properties of electronic tubes and valves. Part 23: Methods of measurement of vacuum pulse modulator tubes and valves
standard by International Electrotechnical Commission, 01/01/1970

IEC 60110-1 Ed. 1.0 b:1998

Power capacitors for induction heating installations – Part 1: General
standard by International Electrotechnical Commission, 06/10/1998

IEC 60227-5 Amd.1 Ed. 2.0 b:1997

Amendment 1 – Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. – Part 5: Flexible cables (cords)
Amendment by International Electrotechnical Commission, 11/26/1997

IEC 60079-4 Ed. 2.0 b:1975

Electrical apparatus for explosive gas atmospheres. Part 4: Method of test for ignition temperature
standard by International Electrotechnical Commission, 01/01/1975

IEC 60050-221 Amd.4 Ed. 1.0 b:2020

Amendment 4 – International Electrotechnical Vocabulary (IEV) – Part 221: Magnetic materials and components
Amendment by International Electrotechnical Commission, 04/23/2020

IEC 60099-8 Ed. 1.0 b:2011

Surge arresters – Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
standard by International Electrotechnical Commission, 01/27/2011

IEC 60068-3-1 Ed. 1.0 b:1974

Environmental testing – Part 3: Background information – Section One: Cold and dry heat tests
standard by International Electrotechnical Commission, 01/01/1974

IEC 60060-1 Ed. 2.0 b CORR1:1992

Corrigendum 1 – High-voltage test techniques. Part 1: General definitions and test requirements
Corrigenda by International Electrotechnical Commission, 03/01/1992