IEC 61757-1-1 Ed. 2.0 b:2020

Fibre optic sensors – Part 1-1: Strain measurement – Strain sensors based on fibre Bragg gratings
standard by International Electrotechnical Commission, 03/27/2020

IEC 61850-9-2 Amd.1 Ed. 2.0 b:2020

Amendment 1 – Communication networks and systems for power utility automation – Part 9-2: Specific communication service mapping (SCSM) – Sampled values over ISO/IEC 8802-3
Amendment by International Electrotechnical Commission, 02/12/2020

IEC 60034-14 Ed. 3.1 b:2007

Rotating electrical machines – Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 03/29/2007

IEC 60034-8 Ed. 3.1 b:2014

Rotating electrical machines – Part 8: Terminal markings anddirection of rotation CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 03/20/2014

IEC 60034-14 Ed. 3.0 b:2003

Rotating electrical machines – Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity
standard by International Electrotechnical Commission, 11/26/2003

IEC 62932-2-2 Ed. 1.0 b:2020

Flow battery energy systems for stationary applications – Part 2-2 Safety requirements
standard by International Electrotechnical Commission, 02/18/2020

IEC /SRD 62559-4 Ed. 1.0 en:2020

Use case methodology – Part 4: Best practices in use case development for IEC standardization processes and some examples for application outside standardization
standard by International Electrotechnical Commission, 03/27/2020

IEC 61169-1-4 Ed. 1.0 b:2020

Radio-frequency connectors – Part 1-4: Electrical test methods – Voltage standing wave ratio, return loss and reflection coefficient
standard by International Electrotechnical Commission, 07/08/2020

IEC 60317-0-4 Ed. 4.0 b:2020

Specifications for particular types of winding wires – Part 0-4: General requirements – Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
standard by International Electrotechnical Commission, 04/27/2020

IEC 60050-723 Ed. 1.0 t:1997

International Electrotechnical Vocabulary (IEV) – Part 723: Broadcasting: Sound, television, data
standard by International Electrotechnical Commission, 03/21/1997

IEC 61076-8-101 Ed. 1.0 b:2020

Connectors for electrical and electronic equipment – Product requirements – Part 8-101: Power connectors – Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
standard by International Electrotechnical Commission, 04/09/2020