IEC 60317-27-3 Ed. 1.0 b:2019
Specifications for particular types of winding wires – Part 27-3: Paper tape covered rectangular copper wire
standard by International Electrotechnical Commission, 11/13/2019
IEC 60704-2-17 Ed. 1.0 b:2020
Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 2-17: Particular requirements for dry-cleaning robots
standard by International Electrotechnical Commission, 10/27/2020
IEC 61076-2-114 Ed. 1.0 b:2016
Connectors for electronic equipment – Product requirements – Part 2-114: Circular connectors – Detail specification for data and power connectors with M8 screw-locking
standard by International Electrotechnical Commission, 09/24/2020
IEC 61031 Ed. 2.0 en:2020
Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences
standard by International Electrotechnical Commission, 07/28/2020
IEC 62841-4-3 Ed. 1.0 b:2020
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
standard by International Electrotechnical Commission, 11/11/2020
IEC 63073-1 Ed. 1.0 b:2020
Dedicated radionuclide imaging devices – Characteristics and test conditions – Part 1: Cardiac SPECT
standard by International Electrotechnical Commission, 10/27/2020
IEC 61076-2-012 Ed. 1.0 b:2020
Connectors for electrical and electronic equipment – Product Requirements – Part 2-012: Circular connectors – Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113
standard by International Electrotechnical Commission, 07/27/2020
IEC 62891 Ed. 1.0 en:2020
Maximum power point tracking efficiency of grid connected photovoltaic inverters
standard by International Electrotechnical Commission, 07/15/2020
IEC 62614-1 Ed. 1.0 b:2020
Fibre optics – Multimode launch conditions – Part 1: Launch condition requirements for measuring multimode attenuation
standard by International Electrotechnical Commission, 06/10/2020
IEC 62899-402-2 Ed. 1.0 en:2020
Printed electronics – Part 402-2: Printability – Measurement of qualities – Edge waviness
standard by International Electrotechnical Commission, 08/21/2020
IEC 62020-1 Cor.1 Ed. 1.0 b:2020
Corrigendum 1 – Electrical accessories – Residual current monitors for household and similar uses (RCMs)
Corrigenda by International Electrotechnical Commission, 07/10/2020
IEC 60904-1 Ed. 3.0 b:2020
Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage characteristics
standard by International Electrotechnical Commission, 09/25/2020