IEC 62056-31 Ed. 1.0 b:1999

Electricity metering – Data exchange for meter reading, tariff and load control – Part 31: Use of local area networks on twisted pair with carrier signalling
standard by International Electrotechnical Commission, 11/30/1999

IEC 61966-9 Ed. 2.0 b:2003

Multimedia systems and equipment – Colour measurement and management – Part 9: Digital cameras
standard by International Electrotechnical Commission, 11/19/2003

IEC 62056-21 Ed. 1.0 b:2002

Electricity metering – Data exchange for meter reading, tariff and load control – Part 21: Direct local data exchange
standard by International Electrotechnical Commission, 05/15/2002

IEC 62053-11 Ed. 1.1 b:2016

Electricity metering equipment (a.c.) – Particular requirements – Part 11: Electromechanical meters for active energy (classes 0,5, 1and 2) CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 11/18/2016

IEC 61892-3 Ed. 2.0 en:2007

Mobile and fixed offshore units – Electrical installations – Part 3: Equipment
standard by International Electrotechnical Commission, 11/21/2007

IEC 61869-2 Ed. 1.0 b:2012

Instrument transformers – Part 2: Additional requirements for current transformers
standard by International Electrotechnical Commission, 09/18/2012

IEC 61800-7-301 Ed. 1.0 b:2007

Adjustable speed electrical power drive systems – Part 7-301: Generic interface and use of profiles for power drive systems – Mapping of profile type 1 to network technologies
standard by International Electrotechnical Commission, 11/27/2007

IEC 62047-10 Ed. 1.0 b CORR1:2012

Corrigendum 1 – Semiconductor devices – Micro-electromechanical devices – Part 10: Micro-pillar compression test for MEMS materials
Corrigenda by International Electrotechnical Commission, 02/28/2012

IEC 61970-301 Ed. 4.0 b:2013

Energy management system application program interface (EMS-API) – Part 301: Common information model (CIM) base
standard by International Electrotechnical Commission, 05/23/2013

IEC 61857-22 Ed. 1.0 b:2002

Electrical insulation systems – Procedures for thermal evaluation – Part 22: Specific requirements for encapsulated-coil model – Wire-wound electrical insulation system (EIS)
standard by International Electrotechnical Commission, 08/09/2002

IEC 61760-2 Ed. 2.0 b:2007

Surface mounting technology – Part 2: Transportation and storage conditions of surface mounting devices (SMD) – Application guide
standard by International Electrotechnical Commission, 04/24/2007