ASD-STAN prEN 3475-604

Aerospace series-Cables, electrical, aircraft use-Test methods-Part 604: Resistance to dry arc propagation
Data Sheet by ASD-STAN Standardization, 06/01/2009

ASD-STAN prEN 3351

Titanium alloy TI-P63001 – Grade 2 – Solution treated and aged – Forgings – De <or= 150 mm
Data Sheet by ASD-STAN Standardization, 09/30/1995

ASD-STAN prEN 3870

Titanium alloy TI-P19001 – Solution treated and aged – Sheet and strip, hot rolled – A <or= 6 mm
Data Sheet by ASD-STAN Standardization, 04/26/1993

ASD-STAN prEN 2997-14

Aerospace series-Connectors, electrical, circular, coupled by threaded ring,fire-resistant or non fire-resistant,operating temperatures – 65 C to 175 C continuous,200 C continuous, 260 C peak-Part 014: Square flange receptacle with integrated accessory-Product standard
Data Sheet by ASD-STAN Standardization, 12/01/2009

ASD-STAN prEN 6120

Aerospace series – Pins, close tolerance, swage locking, protruding head, shear type, in aluminium alloy 7050, chemical film – Inch series
Data Sheet by ASD-STAN Standardization, 12/31/2006

ASD-STAN prEN 4531-101

Aerospace serie – Connectors, optical, circular, single and multipin, coupled by threaded ring – Flush contacts – Part 101: Optical contact for EN 4641-100 cable – 55 deg C to 125 deg C – Product standard
Data Sheet by ASD-STAN Standardization, 12/31/2010

ASD-STAN prEN 2672

Design and construction of pipelines for fluids in liquid or gaseous condition – Design of rigid lines
Data Sheet by ASD-STAN Standardization, 01/20/1989

ASD-STAN prEN 6086

Aerospace series – Static seal elements square ring ethylene propylene, moulded, phosphate ester resistant (- 55 deg C to 107 deg C) – Inch series
Data Sheet by ASD-STAN Standardization, 12/31/2004

ASD-STAN prEN 2492

Rod-Ends, Self-Aligning Ball Bearing With Threaded Shank – Dimensions And Loads – Aerospace Series
Data Sheet by ASD-STAN Standardization, 12/01/1980

ASD-STAN prEN 6024

Screws, 100deg countersunk reduced head, offset crucifrom recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperature)/315 deg C – Inch series
Data Sheet by ASD-STAN Standardization, 10/31/1995

ASD-STAN prEN 2813

Aluminium alloy AL-P-6061- T6 — Drawn tube for pressure applications — 0,6 mm <or= a <or= 12,5 mm
Data Sheet by ASD-STAN Standardization, 11/30/1999