AASHTO R 54-14 (2018)
Standard Practice for Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems
standard by American Association of State and Highway Transportation Officials, 2014
AASHTO TP 65-03
Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
standard by American Association of State and Highway Transportation Officials,
AASHTO T 92-97 (2005)
Standard Method of Test for Determining the Shrinkage Factors of Soils
standard by American Association of State and Highway Transportation Officials,
AASHTO T 272-15
Standard Method of Test for Family of Curves – One-Point Method
standard by American Association of State and Highway Transportation Officials, 2015
AASHTO T 162-15
Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (ASTM Designation: C 305-13)
standard by American Association of State and Highway Transportation Officials, 2015
AASHTO T 167-05
Standard Method of Test for Compressive Strength of Hot-Mix Asphalt
standard by American Association of State and Highway Transportation Officials,
AASHTO T 59-12
Standard Method of Test for Emulsified Asphalts
standard by American Association of State and Highway Transportation Officials, 2012
AASHTO T 383-18
Standard Method of Test for Evaluation of Asphalt Release Agents (ARAs)
standard by American Association of State and Highway Transportation Officials, 2018
AASHTO TP 123-16 (2018)
Provisional Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
standard by American Association of State and Highway Transportation Officials, 2016
AASHTO T 152-11
Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method (ASTM Designation: C 231/C 231M-09a,b)
standard by American Association of State and Highway Transportation Officials, 2011
AASHTO T 106M/T 106-18
Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (ASTM Designation: C109/C109M-16)
standard by American Association of State and Highway Transportation Officials, 2018
AASHTO T 242-18
Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire (ASTM Designation: E274/E274M-15)
standard by American Association of State and Highway Transportation Officials, 2018