BS PD ISO/TS 23690:2023

Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
standard by BSI Group, 08/03/2023

NBBI NB23-2023 Part 1

National Board Inspection Code – NBIC, 2023 Edition – Part 1 – Installation
standard by National Board of Boiler and Pressure Vessel Inspectors, 2023

AS CS 10.1.8-1941

Equipment and supplies for use in public hospitals, Part 1.8: Textiles – Mosquito netting for hospitals and kindred institutions
standard by Standards Australia, 04/01/1941

IEC 61158-6-27 Ed. 1.0 b:2023

Industrial communication networks – Fieldbus specifications – Part 6-27: Application layer protocol specification – Type 27 elements
standard by International Electrotechnical Commission, 03/01/2023

AS 2925.6-1987

Methods of testing thermosetting laminated sheet, Method 6: Method for determining dimensional stability
standard by Standards Australia, 02/02/1987

AASHTO T 315-22

Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
standard by American Association of State and Highway Transportation Officials, 2022

IEC 60335-2-16 Ed. 6.0 b:2022

Household and similar electrical appliances – Safety – Part 2-16: Particular requirements for food waste disposers
standard by International Electrotechnical Commission, 10/01/2022

IEC 62282-3-201 Amd.1 Ed. 2.0 b:2022

Amendment 1 – Fuel Cell Technologies – Part 3-201: Stationary Fuel Cell Power Systems – Performance Test Methods For Small Fuel Cell Power Systems
Amendment by International Electrotechnical Commission, 02/01/2022

NACE RP0185-96

Standard Recommended Practice – Extruded Polyolefin Resin Coating Systems for Underground or Submerged Pipe
standard by National Association of Corrosion Engineers, 01/01/1996

SAE AS7928/8C

TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE (Stabilized: Jul 2023)
standard by SAE International, 07/06/2023