NACE RP0187-05

Design Considerations for Corrosion Control of Reinforcing Steel in Concrete
standard by National Association of Corrosion Engineers, 04/07/2005

SAE AMS6527G

Steel, Bars, Forgings, and Forging Stock 2.0Cr – 10Ni – 14Co – 1.0Mo (0.15 – 0.19C) Vacuum Melted, Normalized and Overaged
standard by SAE International, 05/01/2023

IEC 60287-1-3 Ed. 2.0 en:2023

Electric cables – Calculation of the current rating – Part 1-3: Current rating equations (100 % load factor) and calculation of losses – Current sharing between parallel single-core cables and calculation of circulating current losses
standard by International Electrotechnical Commission, 05/01/2023

NACE TM0185-93

Standard Test Method – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing
standard by National Association of Corrosion Engineers, 03/01/1985

AS B196.2-1966

Specification for roughness comparison specimens – Specimens representing turned and bored surfaces
standard by Standards Australia, 01/01/1966

NACE AMPP SP21474-2023

External Corrosion Control of On-Grade Carbon Steel Storage Tank Bottoms
Report / Survey by National Association of Corrosion Engineers, 05/01/2023

AS ISO/IEC 21000.7-2005

Information technology – Multimedia framework (MPEG 21), Part 7: Digital item adaptation
standard by Standards Australia, 01/01/2005

NACE TM0286-2001

Standard Test Method – Cooling Water Test Unit Incorporating Heat Transfer Surfaces
standard by National Association of Corrosion Engineers, 03/15/2001

SAE J3094_202302

Test Procedure for Internal Heat Exchangers of Mobile Air-Conditioning Systems with R-134a or R-1234yf Refrigerant
standard by SAE International, 02/14/2023

AS U16-1956

55 ton, 1 1/2 per cent nickel-chromium-molybdenum steel (limiting ruling section 4 in.)
standard by Standards Australia, 01/01/1956

SAE AS15721D

FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION-RESISTANT STEEL, TYPE VIII
standard by SAE International, 06/02/2023

AS ISO/IEC 20943.3-2005

Information technology – Procedures for achieving metadata registry content consistency, Part 3: Value domains
standard by Standards Australia, 01/01/2005