AS B69-1940

Table of approximate comparison of hardness scales
standard by Standards Australia, 01/01/1940

NACE TM0183-00

Standard Test Method – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
standard by National Association of Corrosion Engineers,

SAE J3235_202303

Best Practices for Storage of Lithium-Ion Batteries
standard by SAE International, 03/20/2023

API Spec 19ICV

Interval Control Valves (ICV) First Edition
standard by American Petroleum Institute, 06/01/2023

NACE SP0206-2006

Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)
standard by National Association of Corrosion Engineers, 12/01/2006

AASHTO M 345-22

Standard Specification for Materials for Emulsified Asphalt Scrub Seal
standard by American Association of State and Highway Transportation Officials, 2022

AS/NZS 61215.2:2023

Terrestrial photovoltaic (PV) modules – Design qualification and type approval, Part 2: Test procedures (IEC 61215 2:2021, (ED. 2.0) MOD)
standard by Standards Australia / Standards New Zealand, 06/16/2023

SAE AS39029/102B

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES I, II, III, AND IV CONNECTORS)
standard by SAE International, 05/10/2023

SAE AS6029B

Criteria for Laser Control Measures for Aviation Safety
standard by SAE International, 07/12/2023

BS 5160:1989

Specification for steel globe valves, globe stop and check valves and lift type check valves
standard by BSI Group, 07/31/1989

NACE SP0198-2010

Control of Corrosion Under Thermal Insulation and Fireproofing Materials-A Systems Approach
standard by National Association of Corrosion Engineers, 07/01/2010